My Account  |  Login   |  Register  | Tell a friend
 
 >>

Adding a new eyepiece sleeve to an existing DigiMount connector
so you can attach multiple eyepieces to your camera
---

Due to the modular design of the DigiMount system, it can get a little complicated to purchase additional eyepiece rings for use with a DigiMount you already have. Just follow one of these rules and you'll be fine!

If you have the DigiMount L-Series and want to order an additional L-Series sleeve (sizes L1 though L7), then order just the sleeve. Once it arrives, you'll slide it into the DigiMount in place of the sleeve you already have, and you're ready.

If you have the DigiMount S-Series and want to order an additional S-Series sleeve (sizes S1 though S7), then order just the sleeve. Once it arrives, you'll slide it into the DigiMount in place of the sleeve you already have, and you're ready.

If you have the DigiMount L-Series and want to order an S-Series sleeve (sizes S1 though S7), you'll need to order the sleeve, a reducing collar, and a set of four long screws. The reducing collar adapts the DigiMount body to the smaller S-Series sleeves, and the longer screws are needed to grip the smaller sleeve. (If you already have the long screws from an earlier purchase of S-Series sleeves, you don't need to order more.)

If you have the DigiMount S-Series and want to order an L-Series sleeve (sizes L1 though L7), you'll need to order the sleeve and four short screws. You'll actually remove the reducing collar that's already in your DigiMount, before inserting the larger L-Series sleeve. The shorter screws are needed to grip the larger sleeve through the DigiMount body. (If you already have the short screws from an earlier purchase of L-Series rings, you don't need to order more.)

MORE INFORMATION

Manual (PDF, two pages)

Selecting the right DigiMount product from our eyepiece list or by eyepiece diameter

RELATED INFORMATION

DigiMount overview

DigiMount L-Series and S-Series products

If you're not sure which DigiMount you already have, look closely at the pictures in the DigiMount overview, or use the eyepiece list or eyepiece diameter chart. The short screws are approximately 16mm (0.63 inches) long, and the long screws are approximately 22mm (0.86 inches) long.