My Account  |  Login   |  Register  | Tell a friend
 
 >>

Selecting the right DigiMount
based on the manufacturer and model number of your eyepiece
---

This list will identify for you the DigiMount solution for your eyepiece. To help you identify your eyepiece in the list, you can click on the icon and a picture of the eyepiece will appear in a separate window.

If you don't find your eyepiece in this list, please select a DigiMount solution using our eyepiece diameter chart.

More Product Info

Compatibility chart by eyepiece diameter

DigiMount overview

Notes on eyepieces with lips: The eyepieces marked below with one asterisk ( * ) have a lip. While the grip obtained by the DigiMount Adapter when clamped to this ridge area should be sufficient in most cases to provide a firm attachment, we very strongly recommend that the area next to the ridge be 'built-up' so it is level. This will result in a greater area of grip and therefore provide a more secure fixing.

Some eyepieces
in this list are marked with two asterisks ( ** ). The DigiMount Adapter with the Insert Collar in it would normally be fitted by being slid-over the eyepiece and locked in place. To use these particular eyepieces with the DigiMount Adapter the Insert Collar should first be removed from the DigiMount Adapter outer body and slid over the eyepiece. The eyepiece with the Insert Collar attached should then be fitted to the scope. The DigiMount Adapter outer body can then be slid over the eyepiece, fitted onto the Insert Collar and securely locked into place. For convenience, it will probably be best to leave the Insert Collar permanently fitted around the eyepiece on the scope so that the DigiMount Adapter can be easily fitted and removed when needed.

Special Note for Swarovski scopes:The DigiMount Adapter Type L0 can be fitted to the 20-60xzoom eyepiece (marked with ***) , however to do so it is necessary to gently remove the rubber part of the extending eyecup from the eyepiece. The Type L0 DigiMount Adapter Insert Collar does not have a rubber lining and therefore there will be metal to metal contact with the eyepiece. This can be overcome by adhering some tape around the eyepiece section or on the inner surface of the Insert Collar where there is contact to help protect from scratching.

General Note regarding Eyecups: The rubber eyecups fitted to virtually all scopes have small recesses moulded in them to hold them in place. The manufacturers also usually apply a very small amount of 'tacky' type adhesive to help them stay in place. For the new Swarovski eyepiece you do not remove the extending portion of the eyepiece, it is only necessary to very gently 'tease-off' just the rubber ring itself ( the part that your eye normally goes up against ). It does come-off but you do need to be very gentle when doing it, just in case your particular eyepiece has had more adhesive applied to it than most ( our one came off with very little 'teasing' ). It has been reported that some have quite a lot of adhesive applied and that damage can be caused to the eyecup rubber while trying to remove it. You will need to decide yourself whether you wish to proceed with the removal bearing this fact in mind.

Make and Model
Image
Eyepiece Model DigiMount Series
CELESTRON SPOTTING SCOPES
C90
With 45 degree Erect Image
Diagonal Mount - supplied with
scope - model #94113-A
Celstron 18mm Ultima Series
(E/P thumbscrews must be removed)
Type L7
Celestron 26mm Plossl Series Type S1
Celestron 35mm Ultima Series Type L5
CELESTRON TELESCOPE
G8
Plossl 25mm Type S2
KOWA SPOTTING SCOPES
TS1/TS2
27x (WA) screw-in Type ??
TSN1/TSN2
TSN3FL/TSN4FL
*20X WIDE Type L6
*30X WIDE Type L7
30X WIDE Type L6
20-60x ZOOM Type L6
27x (WA) bayonet fit Type ??
20x-40x ZOOM
TS610 etc. series
Type L8
27xWIDE
TS610 etc. series
Type S3
20-60X ZOOM
TS610 etc. series
Type S1
TSN821/TSN822/
TSN823FL/TSN824FL
27x LER 820 series Type S1
32X (WIDE) 820 series Type L4
50X (WIDE) 820 series Type L4
20-60X ZOOM 820 series Type L4
TSN661/TSN662
TSN663FL/TSN664FL
20X WIDE Type L6
30X WIDE Type L6
20-60x ZOOM Type L7
27x (WA) bayonet fit
TS610 etc. series
Type ??
20x-40x ZOOM
TS610 etc. series
Type L8
27xWIDE
TS610 etc. series
Type S3
20x-60X ZOOM
TS610 etc. series
Type L7
TSN611/TSN612
TSN613FL/TSN614FL
ø060 20x Type S2
*20X WIDE Type L6
30X WIDE Type L6
20-60x ZOOM Type L7
27x (WA) bayonet fit Type ??
20x-40x ZOOM Type L8
27xWIDE
TS610 etc. series
Type S3
20x-60X ZOOM
TS610 etc. series
Type S1
LEICA SPOTTING SCOPES
TELEVID 77
APO TELEVID 77
20x (WW/B) Type L1
32x (WW/B) Type L1
40x Type ?
20x-60x ZOOM Type L1
NIKON SPOTTING SCOPES
FIELDSCOPE II ED
20x Type S1
FIELDSCOPE III
FIELDSCOPE III ED
/ED78/ED78A
*15x(60)
**19x(78)
Type L8
20x Type S1
20x(60)
25x(78)
Type S2
*24xWIDE(60)
*30xWIDE(78)
Type L6
24XWF(60)
30xWF(78)
Type L1
*30xWF(60)
*38xWF(78)
Type L6
20x-45x zoom
25x-56x zoom
Type L7
20x-60x zoom (60)
25x-75x zoom (78)
Type L3
24x (60)
30x (78)
Type L2
**20x (60)
**25x (78)
Type S1
30x (60)
38x (78)
Type L1
OPTICRON SPOTTING SCOPES
HR60/HR60SR/HR66GA/
HR66GAED/HR80GA
*20xWW HDF (60/66) 40810
*27xWW HDF (80) 40810
Type S1
22xWW HDF T (60/66)
30xWW HDF T (80)
Type L5
28xWW HDF (60/66) 40809T
38xWW HDF (80) 40809T
Type L5
28xWW HDF (60/66) 40809
38xWW HDF (80) 40809
Type L7
*38xWW HDF (60/66) 40858 Type L7
44xW HDF (60/66) 40859 Type S2
*52xWW HDF (80) 40859 Type L7
60xW HDF (80) 40859 Type S2
70xW HDF (60/66) 40860 Type S2
88x HDF (60/660) 40861 Type S2
95xW HDF (80) 40860 Type S2
120x HDF (80) 40861 Type S2
20-60x HDF Zoom Type L5
20-60x HR (60/66) 40821
27-80x HR (80) 40821
Type S2
ES80 GA/45
*23xWW 40810 Type S1
25xWW HDF T Type L5
*32xWW 40809 Type L7
32xWW 40809T Type L5
20-60x HDF Zoom Type L5
OPTOLYTH SPOTTING SCOPES
TB80GA/TBS80GA/TBS80GAHD/
TBS100GAHDAPO/TBG100GAhDAPO
COMPACTS80/COMPACTG80/
COMPACTS80HDAPO/COMPACTG80HDAPO
20xWW (65/80) (No.19102) Type L6
30xWW (100) Type L5
30xWW (65/80) Type L5
45xWW (100) Type L5
45xWW (65/80) Type L2
65xWW (100) Type L2
70xWW (65/80) Type L5
105xWW (100) Type L5
20-60x Zoom (80/65) Type L2
20-60x Zoom (100) Type L2
20-60x Zoom (80) Type L3
ORION ASTRONOMICAL TELESCOPES
ED80
ORION ULTRASCOPIC 35mm Type L6
PENTAX SPOTTING SCOPES
ED80
SMC XL28
The rubber eyecup is gently eased
off and the metal eyepiece
unscrewed
Type L1
SWAROVSKI SPOTTING SCOPES
AT80/ST80/AT80(HD)/ST80(HD)
15x Type L8
22x Type S1
30x (WW) Type S1
77x Type L7
115x Type L7
20-60x Zoom Type L4
20x - 60 x Zoom (with lock) Type L4
ATS65/80ATS65/80HD)
20x WW Type L2
30x WW Type L2
***20 - 60x Zoom - See Special Note Type L0
ZEISS SPOTTING SCOPES
Diascope
T* FL 65mm
*
The Type L0 DigiMount Adapter Insert Collar does not have a rubber lining and therefore there may be metal to metal contact with the eyepiece. This can be overcome by adhering some tape around the eyepiece section where there is contact to help protect from scratching
The DigiMount Adapter Type L0 can be fitted to the 15-45x zoom eyepiece, however to do so it is necessary to gently remove the rubber part of the extending eyecup from the eyepiece
15-45x Zoom *Type L0
23xWA Type L3
30xWA Type L3
Diascope
T* FL 85mm
*
The Type L0 DigiMount Adapter Insert Collar does not have a rubber lining and therefore there may be metal to metal contact with the eyepiece. This can be overcome by adhering some tape around the eyepiece section where there is contact to help protect from scratching
The DigiMount Adapter Type L0 can be fitted to the 20-60x zoom eyepiece, however to do so it is necessary to gently remove the rubber part of the extending eyecup from the eyepiece
20-60x Zoom *Type L0
30xWA Type L3
40xWA Type L3